Monitoring over fuel dispensers and tanks

In case if there is an existing POS system already installed on the station PTS controller over fuel dispensers and ATG consoles allows to monitor operation of the fuel dispensers and tanks (and optionally to make sales when required). At this PTS controller is connected between existing POS system and fuel dispensers and ATG console (tank probes), PTS controller communicates with fuel dispensers and ATG console (probes) using their proprietary communication protocols and with POS system – using open communication protocols for pumps and ATG console. Monitoring system can connect to PC port of PTS controller and get all data of fuel dispensers sales and tanks real time, at this it can also provide control over the dispensers when required.


Monitoring over fuel dispensers and tanksClick on image to enlarge

Supported pumps communication protocols #


Need more protocols?

We are constantly expanding a list of supported communication protocols and forecourt equipment.
Please contact us if you are interested in other pumps or probes brands, communication protocols or control equipment not listed here.

Supported probes and ATG systems communication protocols #


Need more protocols?

We are constantly expanding a list of supported communication protocols and forecourt equipment.
Please contact us if you are interested in other pumps or probes brands, communication protocols or control equipment not listed here.

Products in structure of this solution:

PTS-2 forecourt controller
PTS-2 forecourt controller

IoT forecourt controller PTS-2 which supports more than 120 brands of pumps and 40 brands of ATG systems. Go ahead with automation!

PTS-1 controller over fuel dispensers and ATG systems
PTS-1 controller over fuel dispensers and ATG systems

Basic forecourt controller PTS-1 which supports more than 120 brands of pumps and 40 brands of ATG systems. Go ahead with automation!



   Ask YOUR questions about
"Monitoring over fuel dispensers and tanks"

  Message is being sent... Please wait.